GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1997 🢒 Sonoma Pickup - 4WD 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Engine Oil Pressure Sensor

Removal Procedure

    Object Number: 18712 Size: SH
  1. Raise the vehicle.

    2. Caution: Provide additional support when a vehicle is on a hoist in the following ways:

       • Before removing parts, support the opposite end. This helps prevent the vehicle from slipping off.
       • Before removing major components, chain the vehicle frame to the hoist pads at the same end as the removal. This helps avoid a tip-off.
    Failure to follow these precautions could cause vehicle damage, serious personal injury, or death.

  2. Disconnect the electrical connector.
  3. Remove the engine oil pressure sensor.

Installation Procedure

    Object Number: 18712 Size: SH
  1. Install the engine oil pressure sensor.
  2. Connect the electrical connector.
  3. Lower the vehicle.