Diagnostic Trouble Code (DTC) Identification Diagnostic Types (2.2L)
DTC
| Description
| DTC Type*
| Default Action
|
P0218
| Transmission Fluid Overtemperature
| D
|
• | DTC P0218 is stored in PCM history |
• | The PCM freezes shift adapts from being updated |
|
P0502
| Vehicle Speed Sensor
Assembly (VSS Assy.) Circuit--Low Input
| B
|
• | DTC P0502 stores in PCM history |
• | The PCM commands second gear only |
• | The PCM commands maximum line pressure |
• | The PCM freezes shift adapts from being updated |
• | The PCM inhibits TCC engagement |
|
P0503
| Vehicle Speed Sensor
Assembly (VSS Assy.) Circuit--Intermittent
| B
|
• | DTC P0503 stores in PCM history |
• | The PCM commands a soft landing to second gear |
• | The PCM commands maximum line pressure |
• | The PCM inhibits TCC engagement |
• | The PCM inhibits 4th gear if the transmission is in hot mode |
• | The PCM freezes shift adapts from being updated |
|
P0560
| System Voltage Malfunction
| D
|
• | DTC P0560 stores in PCM history |
• | All transmission output devices are off |
|
P0711
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--Range/Performance
| B
|
• | DTC P0711 is stored in PCM history |
• | The PCM uses a transmission fluid temperature default value based
on engine coolant, engine run time and IAT at startup |
• | The PCM freezes shift adapts from being updated |
|
P0712
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--Low Input (High Temperature Indicated)
| D
|
• | DTC P0712 is stored in PCM history |
• | The PCM uses a transmission fluid temperature default value based
on engine coolant, engine run time and IAT at startup |
• | The PCM freezes shift adapts from being updated |
|
P0713
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--High Input (Low Temperature Indicated)
| D
|
• | DTC P0713 is stored in PCM history |
• | The PCM uses a transmission fluid temperature default value based
on engine coolant, engine run time and IAT at startup |
• | The PCM freezes shift adapts from being updated |
|
P0719
| Brake Switch Circuit--Low
Input
| D
|
• | DTC P0719 is stored in PCM history |
• | The PCM disregards the brake switch input for TCC scheduling |
|
P0724
| Brake Switch Circuit--High
Input
| D
|
• | DTC P0724 is stored in PCM history |
|
P0740
| Torque Converter
Clutch Solenoid Valve (TCC Sol Valve) Circuit--Electrical
| A
|
• | DTC P0740 is stored in PCM history |
• | The PCM inhibits TCC engagement |
• | The PCM inhibits 4th gear if the transmission is in hot mode |
• | The PCM freezes shift adapts from being updated |
|
P0742
| Torque Converter
Clutch (TCC) System Stuck ON
| B
|
• | DTC P0742 is stored in PCM history |
• | The PCM freezes shift adapts from being updated |
|
P0748
| Pressure Control
Solenoid Valve (PC Sol. Valve) Circuit--Electrical
| D
|
• | DTC P0748 is stored in PCM history |
• | The PCM freezes shift adapts from being updated |
|
P0751
| 1-2 Shift Solenoid
Valve (1-2 SS Valve)--Performance
| A
|
• | DTC P0751 is stored in PCM history |
• | The PCM inhibits 3-2 downshifts if the vehicle speed is greater
than 48 km/h (30 mph) |
• | The PCM commands D2 line pressure |
• | The PCM freezes shift adapts from being updated |
|
P0753
| 1-2 Shift Solenoid
Valve (1-2 SS Valve)--Electrical
| A
|
• | DTC P0753 is stored in PCM history |
• | The PCM inhibits 3-2 downshifts if the vehicle speed is greater
than 48 km/h (30 mph) |
• | The PCM commands D2 line pressure |
• | The PCM freezes shift adapts from being updated |
|
P0756
| 2-3 Shift Solenoid
Valve (2-3 SS Valve)--Performance
| A
|
• | DTC P0756 is stored in PCM history |
• | The PCM commands third gear only |
• | The PCM commands maximum line pressure |
• | The PCM inhibits TCC engagement |
• | The PCM freezes shift adapts from being updated |
|
P0758
| 2-3 Shift Solenoid
Valve (2-3 SS Valve)--Electrical
| A
|
• | DTC P0758 is stored in PCM history |
• | The PCM commands 3rd gear only |
• | The PCM commands maximum line pressure |
• | The PCM inhibits TCC engagement |
• | The PCM freezes shift adapts from being updated |
|
P0785
| 3-2 Shift Solenoid
Valve Assembly (3-2 SS Valve Assy.) Circuit--Electrical
| A
|
• | DTC P0785 is stored in PCM history |
• | The PCM commands a soft landing to 3rd gear |
• | The PCM inhibits TCC engagement |
• | The PCM commands maximum line pressure |
• | The PCM inhibits 4th gear if the transmission is in hot mode |
• | The PCM freezes shift adapts from being updated |
|
P1810
| Automatic Transmission
Fluid Pressure Manual Valve Position Switch (TFP Val. Position Switch) Circuit
Malfunction
| B
|
• | DTC 1810 is stored in PCM history |
• | The PCM commands D2 line pressure |
• | The PCM commands a D4 shift pattern |
• | The PCM freezes shift adapts from being updated |
|
P1860
| Torque Converter
Clutch Pulse Width Modulation Solenoid Valve (TCC PWM Sol. Valve) Circuit--Electrical
| A
|
• | DTC P1860 is stored in PCM history |
• | The PCM inhibits TCC engagement |
• | The PCM inhibits 4th gear if the transmission is in hot mode |
• | The PCM freezes shift adapts from being updated |
|
P1870
| Transmission Component
Slipping
| B
|
• | DTC P1870 is stored in PCM history |
• | The PCM inhibits TCC engagement |
• | The PCM commands maximum line pressure |
• | The PCM inhibits 4th gear if the transmission is in hot mode |
• | The PCM freezes shift adapts from being updated |
|
*DTC Types:
- A-Emission-related, turns the MIL ON after the first failure.
- B-Emission-related, turns the MIL ON after two consecutive
trips with failure.
- C-Non-emission-related, turns the service lamp ON after
the first failure.
- D-Non-emission-related, no lamps.
|
Diagnostic Trouble Code (DTC) Identification Diagnostic Types (4.3L)
DTC
| Description
| DTC Type*
| Default Action
|
P0218
| Transmission Fluid Overtemperature
| D
|
• | DTC P0218 is stored in VCM history |
• | The VCM freezes shift adapts from being updated |
|
P0502
| Vehicle Speed Sensor
Assembly (VSS Assy.) Circuit--Low Input
| B
|
• | DTC P0502 stores in VCM history |
• | The VCM commands second gear only |
• | The VCM commands maximum line pressure |
• | The VCM freezes shift adapts from being updated |
• | The VCM inhibits TCC engagement |
|
P0560
| System Voltage Malfunction
| D
|
• | DTC P0560 stores in VCM history |
• | All transmission output devices are off |
• | The VCM freezes shift adapts from being updated |
|
P0711
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--Range/Performance
| B
|
• | DTC P0711 is stored in VCM history |
• | The VCM uses a transmission fluid temperature default value of
135°C (275°F) |
• | The VCM freezes shift adapts from being updated |
|
P0712
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--Low Input (High Temperature Indicated)
| B
|
• | DTC P0712 is stored in VCM history |
• | The VCM uses a transmission fluid temperature default value of
135°C (275°F) |
• | The VCM freezes shift adapts from being updated |
|
P0713
| Automatic Transmission
Fluid Temperature (TFT) Sensor Circuit--High Input (Low Temperature Indicated)
| B
|
• | DTC P0713 is stored in VCM history |
• | The VCM uses a transmission fluid temperature default value of
135°C (275°F) |
• | The VCM freezes shift adapts from being updated |
|
P0719
| Brake Switch Circuit--Low
Input
| B
|
• | DTC P0719 is stored in VCM history |
|
P0724
| Brake Switch Circuit--High
Input
| D
|
• | DTC P0724 is stored in VCM history |
|
P0740
| Torque Converter
Clutch Solenoid Valve (TCC Sol Valve) Circuit--Electrical
| A
|
• | DTC P0740 is stored in VCM history |
• | The VCM inhibits TCC engagement |
• | The VCM inhibits 4th gear if the transmission is in hot mode |
• | The VCM freezes shift adapts from being updated |
|
P0742
| Torque Converter
Clutch (TCC) System Stuck ON
| B
|
• | DTC P0742 is stored in VCM history |
• | The VCM freezes shift adapts from being updated |
|
P0748
| Pressure Control
Solenoid Valve (PC Sol. Valve) Circuit--Electrical
| D
|
• | DTC P0748 is stored in VCM history |
• | The VCM freezes shift adapts from being updated |
|
P0751
| 1-2 Shift Solenoid
Valve (1-2 SS Valve)--Performance
| A
|
• | DTC P0751 is stored in VCM history |
• | The VCM commands D2 line pressure |
• | The VCM freezes shift adapts from being updated |
|
P0753
| 1-2 Shift Solenoid
Valve (1-2 SS Valve)--Electrical
| A
|
• | DTC P0753 is stored in VCM history |
• | The VCM commands D2 line pressure |
• | The VCM freezes shift adapts from being updated |
|
P0756
| 2-3 Shift Solenoid
Valve (2-3 SS Valve)--Performance
| A
|
• | DTC P0756 is stored in VCM history |
• | The VCM commands third gear only |
• | The VCM commands maximum line pressure |
• | The VCM inhibits TCC engagement |
• | The VCM freezes shift adapts from being updated |
|
P0758
| 2-3 Shift Solenoid
Valve (2-3 SS Valve)--Electrical
| A
|
• | DTC P0758 is stored in VCM history |
• | The VCM commands 3rd gear only |
• | The VCM commands maximum line pressure |
• | The VCM inhibits TCC engagement |
• | The VCM freezes shift adapts from being updated |
|
P0785
| 3-2 Shift Solenoid
Valve Assembly (3-2 SS Valve Assy.) Circuit--Electrical
| A
|
• | DTC P0785 is stored in VCM history |
• | The VCM commands a soft landing to 3rd gear |
• | The VCM inhibits TCC engagement |
• | The VCM commands maximum line pressure |
• | The VCM inhibits 4th gear if the transmission is in hot mode |
• | The VCM freezes shift adapts from being updated |
|
P1810
| Automatic Transmission
Fluid Pressure Manual Valve Position Switch (TFP Val. Position Switch) Circuit
Malfunction
| B
|
• | DTC 1810 is stored in VCM history |
• | The VCM commands D2 line pressure |
• | The VCM commands a D4 shift pattern |
• | The VCM freezes shift adapts from being updated |
|
P1860
| Torque Converter
Clutch Pulse Width Modulation Solenoid Valve (TCC PWM Sol. Valve) Circuit--Electrical
| A
|
• | DTC P1860 is stored in VCM history |
• | The VCM inhibits TCC engagement |
• | The VCM inhibits 4th gear if the transmission is in hot mode |
• | The VCM freezes shift adapts from being updated |
|
P1870
| Transmission Component
Slipping
| B
|
• | DTC P1870 is stored in VCM history |
• | The VCM inhibits TCC engagement |
• | The VCM commands maximum line pressure |
• | The VCM inhibits 4th gear if the transmission is in hot mode |
• | The VCM freezes shift adapts from being updated |
|
P1875
| Four Wheel Drive
Low Circuit Malfunction
| A
|
• | DTC P1875 is stored in VCM history |
• | The VCM commands a normal shift pattern (not a 4WD low shift pattern) |
|
*DTC Types:
- A-Emission-related, turns the MIL ON after the first failure.
- B-Emission-related, turns the MIL ON after two consecutive
trips with failure.
- C-Non-emission-related, turns the service lamp ON after
the first failure.
- D-Non-emission-related, no lamps.
|