- Connect the yellow 2-way connector at the base of the steering column.
- Install the Connector Position Assurance (CPA) to the yellow 2-way connector.
- Install LH Knee Bolster. Refer to Knee Bolsters in Interior Trim
Section 10A4.
- Install LH I/P sound insulator. Refer to Instrument Panel Replacement
in Interior Trim Section 10A4.
- Install the AIR BAG fuse to the fuse block.
- Staying well away from the inflatable restraint steering wheel
inflator module turn the ignition switch to the RUN position.
6.1. | The AIR BAG warning lamp will flash seven times. |
6.2. | The AIR BAG warning lamp will then turn OFF. |
- Perform the SIR Diagnostic System Check if the AIR BAG warning
lamp does not operate as described.