Was the system check performed?

--

Go to Step 2

Go to Radio/Audio System Check

1. Turn the ignition switch to the OFF position.
2. Disconnect the speaker connector.
3. Use a J 39200 DMM in order to measure resistance of the speaker.

Is the resistance within the specified range?

4-15 ohms

Go to Step 3

Go to Step 6

Use a J 39200 DMM in order to measure the resistance at the speaker connector from terminal A to ground.

Does the resistance equal the specified value?

Infinite

Go to Step 4

Go to Step 7

Use a J 39200 DMM in order to measure resistance at the speaker connector from terminal B to ground.

Does the resistance equal the specified value?

Infinite

Go to Step 5

Go to Step 8

1. Reconnect the speaker connector.
2. Use a J 39200 DMM in order to measure the resistance at the radio connector for the speaker feed circuits.

Is the resistance within the specified range?

4-15 ohms

Go to Step 9

Go to Step 10

Replace the speaker.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Repair a short to ground in the speaker feed circuit.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Repair a short to ground in the speaker feed circuit.

Is the repair complete?

--

Go to Radio/Audio System Check

--

1. Inspect for poor connections at the radio.
2. Inspect for poor connections at the speaker.

Are any poor connections present?

--

Go to Step 12

Go to Radio/Audio System Check

1. Inspect for poor connections at the speaker.
2. Inspect for poor connections at the in-line connectors.
3. Inspect for an open in the speaker feed circuits.

Are any poor connections present?

--

Go to Step 12

Go to Radio/Audio System Check

Repair the poor connections.

Is the repair complete?

--

Go to Radio/Audio System Check

--

Service the radio.

Is the repair complete?

--

Go to Radio/Audio System Check

--