Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Cruise Control Module System Check? | -- | Go to Step 2 | |
2 |
Does the lamp remain lit? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 7 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Locate and repair the short to the voltage between the stoplamp switch and the cruise control module. Did you complete the repair? | -- | -- | |
6 | Adjust or replace the stoplamp switch. Did you complete the repair? | -- | -- | |
7 | Does the CHMSL operate properly? | -- | Go to Step 8 | Go to Exterior Lights System Check in Lighting Systems |
8 | Locate and repair the open circuit or high resistance in CKT 1320 (LT BLU) between the cruise control module connector and UBEC connector C1 terminal F11. Did you complete the repair? | -- | -- | |
9 | Inspect the terminals for proper contact. Are the contacts clean? | -- | Go to Step 11 | Go to Step 10 |
10 | Clean the contacts as needed. Is the action complete? | -- | -- | |
11 | Replace the cruise control module. Refer to Cruise Control Module Replacement . Did you complete the repair? | -- | -- |
