GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Sonoma Pickup - 4WD 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 In-Line Fuel Filter Replacement

Removal Procedure
  1. Relieve the fuel pressure. Refer to Fuel Pressure Relief .

    2. Object Number: 63353 Size: SH
  2. Remove the fuel filter quick-connect fitting. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  3. Remove the fuel filter nut.

    4. Object Number: 17412 Size: SH
  4. Remove the clamp bolt.
  5. Remove the filter and the clamp from the fuel pipes.

    6. Object Number: 17413 Size: SH
  6. Remove the clamp from the filter.

Installation Procedure

    Object Number: 17413 Size: SH

    Notice: Always re-attach the fuel lines and fuel filter with all original type fasteners and hardware.

    Do not repair sections of fuel pipes.

  1. Install the clamp to the fuel filter.

    2. Object Number: 17412 Size: SH
  2. Install the filter and clamp to the fuel pipes.
  3. Install the clamp bolt.

    4. Object Number: 63353 Size: SH
  4. Install the fuel filter nut.
  5. Install the fuel filter quick-connect fitting. Refer toQuick Connect Fitting(s) Service (Metal Collar) .
  6. Connect the negative battery cable.
  7. Inspect for fuel leaks through the following steps:
    8. 7.1. Turn the ignition switch to the ON position for two seconds.
    7.2. Turn the ignition switch to the OFF position for ten seconds.
    7.3. Turn the ignition switch to the ON position.
    7.4. Check for fuel leaks.