GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Sonoma Pickup - 4WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Shift Lever Replacement

Removal Procedure
  1. Rase the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 392695 Size: SH
  2. Remove the shift lever from the shifter.

    3. Object Number: 392696 Size: SH
  3. Remove the screws securing the boot to the panel.

Installation Procedure

    Object Number: 392696 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the screws securing the boot to the panel.

    2. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 392695 Size: SH
  2. Install the shift lever to the shifter.
  3. Lower the vehicle.