GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Sonoma Pickup - 4WD 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Accelerator Control Cable Bracket Replacement

Removal Procedure

    Object Number: 642933 Size: SH
  1. Remove the accelerator and cruise cable from the bracket, if so equipped.
  2. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  3. Remove the two accelerator cable bracket attaching bolts (2) and the accelerator cable bracket (1).

Installation Procedure

    Object Number: 642933 Size: SH
  1. Install the accelerator cable bracket (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the two attaching bolts (2).

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Reinstall the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  4. Reinstall the accelerator, cruise and transmission cables, if so equipped.