Important: Remove the caliper bracket only under the following circumstances:

1. Remove the brake pads. Refer to Rear Disc Brake Pads Replacement .



2. Remove the caliper bracket mounting bolts.



3. Remove the caliper bracket.

1. Install the caliper bracket.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the caliper bracket mounting bolts.

Tighten
Tighten the anchor bracket mounting bolts to 70 N·m (52 lb ft).




3. Install the brake pads. Refer to Rear Disc Brake Pads Replacement .