Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 | Verify that the underhood lamp is inoperative. Does the underhood lamp operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Remove the underhood lamp bulb and connect a test lamp between the socket center terminal and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the bulb. Is the repair complete? | -- | Go to Step 8 | -- |
5 | Connect a test lamp between CKT 1732 (ORN) at the underhood lamp connector and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | Go to Step 6 | Go to Step 7 |
6 | Replace the underhood lamp assembly. Refer to Underhood Lamp Replacement . Is the repair complete? | -- | Go to Step 8 | -- |
7 | Repair the open or high resistance in CKT 1735 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |