Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Do the wipers operate at all with the wiper switch in HI? | -- | Go to Step 4 | Go to Step 3 |
3 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | Go to Step 13 | -- |
4 |
Is the test light on? | -- | Go to Step 8 | Go to Step 5 |
5 | Check for a poor connection at connector C211, or for an open in the pigtail to the wiper/washer switch. Is a poor connection or open present? | -- | Go to Step 7 | Go to Step 6 |
6 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | Go to Step 13 | -- |
7 | Repair the poor connection or open. Is the repair complete? | -- | Go to Step 13 | -- |
8 |
Is the test light on? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 92. Is the repair complete? | -- | Go to Step 13 | -- |
10 | Check for a poor connection to the wiper motor. Is a poor connection condition present? | -- | Go to Step 11 | Go to Step 12 |
11 | Repair the poor connection to the wiper motor. Is the repair complete? | -- | Go to Step 13 | -- |
12 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Symptoms |
