Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Check the washer solvent container fluid level. Is the washer solvent container empty? | -- | Go to Step 3 | Go to Step 4 |
3 | Fill the washer solvent container. Is the washer solvent container filled? | -- | Go to Step 19 | -- |
4 | Check the washer hoses to ensure that they are correctly attached and that they are not pinched or kinked. Are the washer hoses OK? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair or replace the washer hoses. Is the repair or replacement complete? | -- | Go to Step 19 | -- |
6 | Check for clogged windshield washer nozzles. Are the nozzles clogged? | -- | Go to Step 7 | Go to Step 8 |
7 | Replace the clogged nozzles. Is the replacement complete? | -- | Go to Step 19 | -- |
8 |
Is the test light on? | -- | Go to Step 9 | Go to Step 12 |
9 | Check for a poor connection at the washer pump connector. Is a poor connection present? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the poor connection. Is the repair complete? | -- | Go to Step 19 | -- |
11 | Replace the washer pump. Refer to Washer Pump/Reservoir Replacement . Is the replacement complete? | -- | Go to Step 19 | -- |
12 |
Is the test light on? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the poor connection or open in CKT 350. Is the repair complete? | -- | Go to Step 19 | -- |
14 |
Is the test light on? | -- | Go to Step 15 | Go to Step 16 |
15 | Repair the poor connection or open in CKT 228. Is the repair complete? | -- | Go to Step 19 | -- |
16 | Check for an poor connection at wiper/washer switch connector C211, terminal E9. Is a poor connection present? | -- | Go to Step 17 | Go to Step 18 |
17 | Repair the poor connection at wiper/washer switch connector C211, terminal E9. Is the repair complete? | -- | Go to Step 19 | -- |
18 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard or Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | Go to Step 19 | -- |
19 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Symptoms |
