Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The liftgate/endgate lock cylinder switch does not operate. The remote release function on the rear wiper/washer switch and endgate/liftgate window release switch operates correctly. | ||||
1 | Did you review the release system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify that the rear window release is inoperative with the liftgate/endgate lock Cylinder switch. Does the rear window release operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is voltage present? | B+ | Go to Step 4 | Go to Step 7 |
4 |
Did the lift window release actuator operate? | -- | Go to Step 10 | Go to Step 5 |
5 |
Is voltage present? | -- | Go to Step 6 | Go to Step 8 |
6 |
Did the lift window release actuator operate? | -- | Go to Step 11 | Go to Step 9 |
7 | Repair the open in CKT 840 (ORN). Refer to Wiring Repairs in wiring systems. Is the repair complete? | B+ | Go to Step 12 | -- |
8 |
Is the repair complete? | -- | Go to Step 12 | -- |
9 | Repair the open in CKT 56 (BLK/WHT). Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | Go to Step 12 | -- |
10 | Replace the liftgate/endgate lock cylinder switch. Refer to Endgate Lock Cylinder Replacement . Is the repair complete? | -- | Go to Step 12 | -- |
11 | Replace the LH door lock cylinder switch. Refer to Door Lock Cylinder Replacement in doors. Is the repair complete? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
