Subject: | Revised Engine Cranks But Does Not Run Diagnostic Table |
Models: | 2000 Chevrolet and GMC C/K Pickup Models |
| 2000 Chevrolet and GMC S/T Pickup and Utility Models |
| 2000 Chevrolet and GMC M/L, G Van Models |
This bulletin is being issued to revise the Engine Cranks But Does Not
Run diagnostic table in the Engine Controls - 4.3L and Engine Controls
- 5.0L, 5.7L sub-sections of the Service Manual. Please replace the
current information in the Service Manual with the following information.
The following information has been updated within SI2000. If you are
using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.
The fuel pressure specification listed in the Values column for Step 7
currently shows 379-413 kPa (55-60 psi). The specification should
read 414-455 kPa (60-66 psi).