GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Sonoma Pickup - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 136-NP4 (One Speed Automatic) 🢒 Transfer Case Shield Replacement

Removal Procedure

    Object Number: 707039 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transfer case shield mounting bolts from the crossmember.
  3. Remove the transfer case shield from the crossmember.

Installation Procedure

    Object Number: 707039 Size: SH
  1. Install the transfer case shield.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the transfer case mounting bolts to the crossmember.

    3. Tighten
    Tighten the transfer case shield bolts to 33 N·m (24 lb ft).

  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.