GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Sonoma Pickup - 4WD 🢒 Restraints 🢒 SIR 🢒 Disabling the SIR System
  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2. Turn the ignition switch to the LOCK position.
  3. Remove the key from the ignition switch.

    4. Important: With the SIR Fuse removed and the ignition switch in the ON position, the AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.

  4. Remove the SIR Fuse from the IP fuse block.
  5. Remove the sound insulator-LH. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
  6. Remove the knee bolster, if equipped. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.

    7. Object Number: 9041 Size: SH
  7. Remove the connector position assurance (CPA) from the driver yellow 2-way connector located at the base of the steering column.

    8. Object Number: 9042 Size: SH
  8. Disconnect the driver yellow 2-way connector located at the base of the steering column.
  9. Open the IP compartment door, lift stop and allow door to fully open.

    10. Object Number: 208427 Size: SH
  10. Remove the connector position assurance (CPA) from the passenger yellow 2-way connector located behind the glove box.
  11. Disconnect the passenger yellow 2-way connector located behind the glove box.