Tools Required
J 42450-A Wheel
Hub Resurfacing Kit
Removal Procedure
The brake rotor can be removed without separating the caliper from the
caliper bracket (JC1 System).
- Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
in Tires and Wheels.
Notice: Support the brake caliper with heavy mechanic wire, or equivalent,
whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and
in turn may cause a brake fluid leak.
- Remove the caliper or caliper/bracket assembly and support with heavy
mechanics wire or equivalent. DO NOT disconnect the hydraulic brake flexible
hose from the caliper. Refer to
Front Brake Caliper Replacement
.
- Remove the brake pads (JC1 System). Refer to
Front Disc Brake Pads Replacement
.
- Remove the caliper bracket. Refer to
Front Brake Caliper Bracket Replacement
.
- Remove and dispose of the sheet metal retainers (JC1 System).
- Remove the wheel bearings (JM3 System). Refer to
Front Wheel Hub, Bearing, and Seal Replacement
in Front Suspension.
- Remove the rotor (1).
- Inspect and clean all the parts. Replace parts as necessary.
- Refinish the rotor if necessary. Refer to
Brake Rotor Refinishing
.
Installation Procedure
Caution: Do not move the vehicle until a firm brake pedal is obtained. Failure
to obtain a firm pedal before moving vehicle may result in personal injury.
Notice: Whenever the brake rotor has been separated from the wheel bearing flange,
clean any rust or foreign material from the mating surface of the rotor and
flange with the J 42450 hub cleaning kit. Failure to do
this may result in increased lateral runout of the rotor and brake pulsation.
- Use the J 42450-A
to clean the hub flange (JC1 System).
- Install the wheel bearings (JM3 System). Refer to
Front Wheel Hub, Bearing, and Seal Replacement
in Front Suspension.
- Install the rotor (1).
- Install the caliper bracket. Refer to
Front Brake Caliper Bracket Replacement
.
- Install the brake pads (JC1 System). Refer to
Front Disc Brake Pads Replacement
.
- Install the caliper. Refer to
Front Brake Caliper Replacement
.
- Install the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
in Tires and Wheels.
- Lower the vehicle.