GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Sonoma Pickup - 4WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Bellcrank Replacement - Liftgate

Removal Procedure

    Object Number: 594644 Size: SH
  1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  2. Release the handle and the latch rods from the bellcrank.
  3. Remove the bolts that retain the bellcrank to the liftgate.
  4. Remove the bellcrank from the liftgate.

Installation Procedure

    Object Number: 594644 Size: SH
  1. Install the bellcrank to the liftgate.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the bellcrank to the liftgate.

    3. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  3. Engage the handle and the latch rods to the bellcrank.
  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .