GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Sonoma Pickup - 4WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Roof Console Replacement

Roof Console Replacement Full Length

Removal Procedure
  1. Remove the overhead lamp lens on the overhead console.

    2. Object Number: 673168 Size: SH
  2. Remove the 3 overhead console roof screws. One screw is located towards the front of the console and the other 2 are located behind the dome lamp lens.
  3. Disconnect the electrical connectors.
  4. Remove the console.

Installation Procedure

    Object Number: 673168 Size: SH
  1. Install the console to the roof.
  2. Connect the electrical connectors.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the overhead console to the roof with the three roof screws.

    4. Tighten
    Tighten the overhead console screws to 2 N·m (18 lb in).

Roof Console Replacement Short

Removal Procedure

    Object Number: 668337 Size: SH
  1. Remove the console roof screw.
  2. Disconnect the electrical connectors.
  3. Remove the console.

Installation Procedure

    Object Number: 668337 Size: SH
  1. Install the console to the roof.
  2. Connect the electrical connectors.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the console roof screw.

    4. Tighten
    Tighten the overhead console screw to 2 N·m (18 lb in).