GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Sonoma Pickup - 4WD 🢒 Body and Accessories 🢒 Seats 🢒 Seat Adjuster Motor Guard Replacement

Removal Procedure

    Object Number: 544186 Size: SH
  1. Remove the 2 screws securing the guard to the seat.
  2. Remove the guard.

Installation Procedure

    Object Number: 544186 Size: SH
  1. Position the guard on the front of the seat adjuster assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the guard to the seat with the 2 screws.

    3. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).