GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 306293  Size: SH
  1. Open the sunroof until the wind deflector springs are exposed.
  2. Remove the sunroof. Refer to Sunroof Replacement .
  3. Drill out the rivets that secure the wind deflector springs to the sunroof assembly.
  4. Remove the wind deflector springs.
  5. Remove the wind deflector from the sunroof assembly.

Installation Procedure

  1. Install the wind deflector to the sunroof assembly.

  2. Object Number: 306293  Size: SH
  3. Install the wind deflector springs.
  4. Ensure that the wind deflector springs are installed on the correct side of the sunroof. The lower section of the notch at the rear of the spring must be on the outboard side of the sunroof assembly.

  5. Install the rivets that secure the wind deflector springs to the sunroof assembly.
  6. Install the sunroof. Refer to Sunroof Replacement .
  7. Ensure that the tabs at the front of the wind deflector are tucked under the front edge of the roof opening.

  8. Close the sunroof.