Removal Procedure
- Release the park brake, if applied.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Loosen the park brake cable. Refer to Park Brake Adjustment .
- Remove the park brake release handle.
- Press the retaining tabs in on the front park brake cable.
- Remove the front park brake cable from the park brake pedal.
- Remove the park brake pedal mounting bolts.
- Remove the park brake pedal assembly.
Installation Procedure
- Install the brake pedal assembly.
- Install the park brake pedal mounting bolts and the nut.
- Install the park brake cable to the brake pedal assembly.
- Install the front brake cable to the park brake pedal assembly.
- Install the brake release handle.
- Adjust the park brake cable. Refer to Park Brake Adjustment .
- Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the park brake pedal retaining bolts and the nut to 25 N·m
(18 lb ft).
Important: Ensure that the brake cable retainer are expanded and are locked in the park brake pedal bracket
