Important: The following steps must be completed before using the symptom tables.
- Perform
Diagnostic System Check - Instrument Cluster
before using the Symptom Tables in order to verify that all of the following are true:
• | The control modules can communicate via the class 2 serial data link. |
- Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Visual/Physical Inspection
• | Inspect for aftermarket devices which could affect the operation of the Instrument Cluster or Audible Warning Systems. Refer to
Checking Aftermarket Accessories
in Wiring Systems. |
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
• | Inspect the reservoirs for the proper fluid level before beginning diagnosis. |
• | Inspect the applicable reservoir for the proper fluid level related to the indicator or message. |
• | Verify that the indicators work properly during the displays test. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
Gages and Odometer
Indicators
Driver Information Center
Instrument Cluster Dimming
Audible Warning