Subject: | Hood Hinge Rattle (Install Spring Washer) |
Models: | 1995-2004 Chevrolet S-10 |
1995-2005 Chevrolet Blazer |
1995-2004 GMC Sonoma |
1995-2005 GMC Jimmy |
1996-2002 Oldsmobile Bravada |
(Plant Codes 8 and K) |
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 01-08-63-001A (Section 08 -- Body and Accessories).
Some customers may comment on a rattle coming from either or both front corners of the instrument panel near the hood hinge areas. This noise may often be mistaken for a loose shock absorber. The rattle may be heard when driving over rough roads and is most noticeable when the road surface creates a side-to-side vehicle motion.
Excessive clearance at the hood hinge attaching bolt may cause this condition. The excessive clearance allows the hood hinge to make metal contact with the hood hinge bracket, which produces a rattling noise.
Important: For additional information, see the Body Front End subsection of the Body and Accessories Section of the appropriate Service Manual.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
Part Number | Description |
---|---|
12383460 | Washer - Hood Hinge |
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
B1953 | Hinge, Hood Rattle (Right or Left) - Install Washer | 0.3 hr |
B1954 | Hinges, Hood Rattle (Both) - Install Washers | 0.4 hr |