GM Service Manual Online
For 1990-2009 cars only

Special Tools

DW-110-060 Engine Assembly Support Fixture

Removal Procedure


    Object Number: 1765828  Size: SH

    Important: Only lift the engine far enough to take the weight off the transaxle rear mount assembly, or damage to the mount and lifting equipment failure may occur.

  1. Support the engine assembly using DW-110-060 .

  2. Object Number: 1822598  Size: SH
  3. Remove the transaxle rear mount-to-bracket through bolt.
  4. Remove the transaxle rear mount bracket retaining bolts from the transaxle.
  5. Remove the transaxle rear mount bracket.
  6. Remove the transaxle rear mount retaining bolts from the cradle.
  7. Remove the transaxle rear mount.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1822598  Size: SH
  1. Install the transaxle rear mount to the cradle.
  2. Tighten
    Tighten the transaxle rear mount retaining bolts to 90 N·m (66 lb ft).

  3. Install the transaxle rear mount bracket to the transaxle.
  4. Tighten
    Tighten the transaxle rear mount bracket retaining bolts to 90 N·m (66 lb ft).

    Important: Before tightening the transaxle rear mount through bolt, swing the engine assembly backwards and forwards or from the side to side for the proper alignment.

  5. Install the transaxle rear mount through bolt.
  6. Tighten
    Tighten the transaxle rear mount to bracket through bolt to 90  N·m (66 lb ft).

  7. Remove the engine support fixture DW-110-060 .