GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Terrain 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.2L, or 3.6L 🢒 Engine Front Mount Replacement

Tools Required

DW-110-060 Engine Assembly Support Fixture

Removal Procedure

    Object Number: 1765828 Size: SH

    Important: Only lift the engine far enough to take the weight off the transaxle front mount assembly, or damage to the mount and lifting equipment failure may occur.

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Support the engine assembly using DW-110-060 .

    3. Object Number: 1801520 Size: SH
  3. Remove the transaxle front mount-to-cradle through bolt.
  4. Remove the transaxle front mount retaining bolts from the transaxle.
  5. Remove the transaxle front mount assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1801520 Size: SH
  1. Install the transaxle front mount assembly.

    2. Tighten
    Tighten the transaxle front mount retaining bolts to 50 N·m (37 lb ft).

    Important: Before tightening the transaxle front mount through bolt swing the engine assembly backwards and forwards or from the side to side for the proper alignment.

  2. Install the transaxle front mount through bolt.

    3. Tighten
    Tighten the transaxle front mount-to-cradle through bolt to 90 N·m (66 lb ft).

  3. Remove DW-110-060 .
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.