Tools Required
DW-110-060
Engine Assembly Support Fixture
Removal Procedure
- Remove the battery and battery tray. Refer to
Battery Tray Replacement
.
- Remove the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.
Important: Only lift the engine far enough to take the weight off the transaxle front mount assembly, or damage to the mount and lifting equipment failure may occur.
- Support the engine assembly using the
DW-110-060
.
- Remove the transaxle mount bracket retaining bolts from the transaxle.
- Remove the transaxle mount assembly retaining bolts from the left front longitudinal.
- Remove the transaxle mount assembly.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the transaxle mount assembly.
Tighten
• | Tighten the transaxle mount assembly retaining bolts (2) to 37 N·m (27 lb ft). |
• | Tighten the transaxle mount bracket retaining bolts (1) to 50 N·m (37 lb ft). |
- Remove
DW-110-060
.
- Install the battery and battery tray. Refer to
Battery Tray Replacement
.
- Install the engine dress cover. Refer to
Fuel Injector Sight Shield Replacement
.