Removal Procedure
- Remove the front seat from the vehicle. Refer to
Bucket Seat Replacement.
- Remove the back panel.
- Remove the each seat trim.
- Disconnect the electrical connectors.
- Remove the bolts and the seatback.
Installation Procedure
- Install the seatback onto the seat cushion.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front seatback bolts.
Tighten
Tighten the front seatback bolts to 45 N·m (33 lb ft).
- Connect the electrical connectors.
- Install the seat trims to its original position.
- Install the back panel onto the seat.
- Install the front seat in the vehicle. Refer to
Bucket Seat Replacement.