GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Terrain 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1768939 Size: SH

    Important: Hold the link with a wrench during nut removal.

  2. Remove the stabilizer link to stabilizer shaft nuts.

    3. Object Number: 1768942 Size: SH
  3. Remove the stabilizer shaft clamp bolts.
  4. Remove the stabilizer shaft from the stabilizer link ball studs, while removing the stabilizer shaft from the vehicle.

Installation Procedure


    Object Number: 1768942 Size: SH
  1. Position the stabilizer shaft in the vehicle, while installing the links on the stabilizer shaft.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft clamp bolts.

    3. Tighten
    Tighten the bolts to 70 N·m (52 lb ft).


    Object Number: 1768939 Size: SH

    Important: Hold the link with a wrench during nut installation.

  3. Install the stabilizer link to stabilizer shaft nuts.

    4. Tighten
    Tighten the nuts to 57 N·m (42 lb ft).

  4. Lower the vehicle.