GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2009
🢒
Terrain
🢒
Suspension
🢒
Front Suspension
🢒 Front Wheel Bearing and Hub Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the front tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
Remove the front brake rotor. Refer to
Front Brake Rotor Replacement
.
Disconnect the wheel speed sensor electrical connector, if equipped.
Remove the wheel speed sensor electrical connector, if equipped, from the connector bracket.
Remove the front hub nut.
Support the wheel drive shaft with heavy mechanic's wire or equivalent.
Remove and discard the wheel bearing/hub mounting bolts.
Remove the wheel bearing/hub assembly from the steering knuckle.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the wheel bearing/hub assembly to the steering knuckle with the bolts and tighten to
115 N·m (85 lb ft)
.
Install the hub nut to the axle shaft and tighten to
205 N·m (157 lb ft)
.
Remove the mechanic's wire from the wheel drive shaft.
Install the wheel speed sensor electrical connector, if equipped, to the mounting bracket.
Connect the wheel speed sensor electrical connector, if equipped.
Install the front brake rotor. Refer to
Front Brake Rotor Replacement
.
Install the front tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
Lower the vehicle.