Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the plastic caps and the bolts securing the rear portion of the front seat to the floor.
- Disconnect the electrical connectors.
- Remove the seat.
Installation Procedure
- Install the seat.
- Connect the electrical connectors.
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts into the rear portion of the front seat.
Tighten
Tighten the front seat-to-floor bolts to 45 N·m (33 lb ft).
- Install the plastic caps.
- Connect the negative battery cable.