GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Note: Left-Hand Drive Shown, Right-Hand Drive Similar.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

  2. Object Number: 1794999  Size: SH
  3. Remove the screws at the base of the storage compartment.
  4. Open and remove the screws.
  5. Disconnect the electrical connector.
  6. Remove the storage compartment.

Installation Procedure


    Object Number: 1794999  Size: SH
  1. Position the storage compartment in the instrument panel.
  2. Connect the electrical connector.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the storage compartment with the screws and tighten to 2 N·m (18 lb in).
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.