Special Tools

DW-110-060 Engine Assembly Support Fixture

Note: Only lift the engine far enough to take the weight off the engine mount assembly, or damage to the mount and lifting equipment failure may occur.

1. Support the engine assembly using DW-110-060 fixture .



2. Remove the engine mount adapter retaining bolts from the engine mount support bracket.
3. Remove the engine mount frame side bracket retaining bolt and nuts.
4. Remove the engine mount assembly.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the engine mount assembly and tighten.

•	The engine mount frame side bracket retaining bolt to 100 N·m (73.8 lb ft).

•	The engine mount assembly nuts to 90 N·m (66.4 lb ft).

•	The engine mount bracket retaining bolts to 50 N·m (37 lb ft).

2. Remove DW-110-060 fixture .