For 1990-2009 cars only
- Block the wheels.
- Disconnect the air line from the balance port (4).
- Start the engine.
- Charge the system air pressure to the governor cut-out point.
- Apply the system park valve.
- Apply a soap solution to the exhaust port and the balance port (4).
- Check that the leakage is less than a 25 mm (1 in) bubble in 5 seconds. Replace or overhaul the valve if the leakage exceeds these limitations. Refer to Rear Air Brake Quick Release Double Check Valve Replacement - Right Side or Air Brake System Description and Operation .
- Apply a soap solution around the cap nut at the supply port (6) and the seam between the upper and the lower bodies.
- Leakage is not permissible. Replace or overhaul the valve if bubbles appear. Refer to Rear Air Brake Quick Release Double Check Valve Replacement - Right Side or Air Brake System Description and Operation .
- Pull out the system park valve.
- Connect the line at the balance port (4).
- Disconnect the line at the supply port (6).
- Firmly apply the brake pedal.
- Apply a soap solution to the supply port (6).
- Check that leakage is less than 25 mm (1 in) bubble in 5 seconds.
- Replace or overhaul the valve if the leakage exceeds these limitations. Refer to Rear Air Brake Quick Release Double Check Valve Replacement - Right Side or Air Brake System Description and Operation .
- Connect the air line at the supply port (6).
- Check for leaks in the air lines.
- Remove the wheel blocks.
