- Install new O-rings to the oil filter adapter and oil cooler assembly. Lubricate the O-rings with engine oil.
- Install the oil filter adapter and oil cooler assembly.
- Install the five oil filter adapter and oil cooler assembly bolts (1).
- Install a new O-ring onto the engine coolant pipe.
- Lubricate the O-ring with engine coolant. Do not use oil or grease.
- Install the engine coolant pipe to the oil filter adapter and oil cooler assembly.
- Install a new oil filter.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the oil filter adapter and oil cooler assembly bolts to 25 N·m
(18 lb ft).
Tighten
Tighten the oil filter to 24 N·m (18 lb ft).
