Tools Required
J 41240 Fan Clutch Remover
and Installer
Removal Procedure
- Remove the air cleaner layer. Refer to the appropriate procedure:
- Install
the J 41240
in order to secure
the pulley.
- Remove the fan clutch assembly (2).
- Inspect the following components for cracks, distortion, or other damage:
- Remove the bolts from the fan clutch.
- Separate the fan clutch from the fan blade.
Installation Procedure
- Install
the fan clutch (2) to the fan blade (1).
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the bolts to the fan clutch.
Tighten
Tighten the bolts to 25 N·m (18 lb ft).
- Install the fan clutch assembly to the pulley.
- Install the J 41240
in
order to secure the pulley.
Tighten
Tighten the nut to 145 N·m (107 lb ft).
- Install the air cleaner layer. Refer to the appropriate procedure: