GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 822271  Size: SH

    Important: The ignition should always be OFF when removing or installing the throttle actuator control (TAC) module connectors.

  1. Remove the electrical connectors from the TAC module .
  2. Remove the TAC module from the multi-use module bracket shelf.

Installation Procedure


    Object Number: 822271  Size: SH
  1. Install the TAC module to the multi-use module bracket shelf with 3 nuts.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Connect the electrical connectors to the TAC module .
  4. Tighten
    Tighten the TAC module nuts to 9 N·m (80 lb in).