Removal Procedure
- Remove the air cleaner layer. Refer to
Air Cleaner Replacement
.
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
.
- Clean the area around the fuel pressure connection
with GM X-30A or equivalent.
- Remove the fuel pressure connection core (2) using a standard
valve core removal and installation tool.
Installation Procedure
- Install the fuel pressure connection core assembly (2)
using a standard valve core removal and installation tool.
- Tighten the fuel filler cap.
- Connect the negative battery cable.
- Inspect for leaks.
4.1. | Turn ON the ignition for 2 seconds. |
4.2. | Turn OFF the ignition for 10 seconds. |
4.3. | Turn ON the ignition. |
4.4. | Inspect for fuel leaks. |
- Install the fuel pressure connection valve cap (1).
- Install the air cleaner layer. Refer to
Air Cleaner Replacement
.