GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the air cleaner. Refer to Air Cleaner Replacement .

  2. Object Number: 1387855  Size: SH
  3. Remove the engine wiring harness. Refer to Engine Wiring Harness Assembly Replacement .
  4. Remove the water outlet. Refer to Water Outlet Tube Replacement in Engine Cooling.
  5. Remove the exhaust gas recirculation (EGR) cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
  6. Disconnect the right fuel rail feed pipe fittings (1, 3).
  7. Remove the fuel rail pipe clamp bolts (2).

  8. Object Number: 1335586  Size: SH
  9. Remove the right fuel rail feed pipe.

Installation Procedure


    Object Number: 1335586  Size: SH
  1. Install the right fuel rail feed pipe.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1387855  Size: SH
  3. Install the fuel rail pipe clamp bolts (2).
  4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  5. Connect the right fuel rail feed pipe fittings (1, 3).
  6. Tighten
    Tighten the fittings to 41 N·m (30 lb ft).

  7. Install the EGR cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
  8. Install the water outlet. Refer to Water Outlet Tube Replacement in Engine Cooling.
  9. Install the engine wiring harness. Refer to Engine Wiring Harness Assembly Replacement .
  10. Install the air cleaner. Refer to Air Cleaner Replacement .
  11. Prime the fuel system. Refer to Fuel System Priming .
  12. Start the engine. If the engine stalls, repeat the above step.
  13. Once the engine starts, inspect for fuel leaks.