GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 793427  Size: SH
  1. Disconnect the transmission fluid temperature (TFT) sensor electrical connector (1).
  2. Remove the TFT sensor (2).

Installation Procedure

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 793427  Size: SH
  1. Install the TFT sensor (2).
  2. Tighten
    Tighten the sensor to 24 N·m (18 lb ft).

  3. Connect the TFT sensor electrical connector (1).