GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 204570  Size: SH
  1. Pull the strip from the pinch-weld flange.
  2. Remove the weatherstrip from the door opening.

Installation Procedure


    Object Number: 204570  Size: SH
  1. Install the weatherstrip to the pinch-weld flange.
  2. Position the weatherstrip in the upper right corner of the door opening.
  3. Ensure that the end of the seal hangs vertically and is approximately 30.5 cm (1 ft) below the rocker panel.
  4. Push the weatherstrip onto the flange. Start at a corner and work around the entire edge of the door opening.