GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

Schematic Reference: Door Lock/Indicator Schematics

Connector End View Reference: Master Electrical Component List

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

2

Actuate all door lock switches to both the lock and unlock positions.

Did all the doors lock and unlock from all of the switches?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

3

Did all of the door lock switches lock and unlock at least one door lock actuator?

Go to Step 4

Go to Step 6

4

  1. Disconnect the inoperative door lock actuator.
  2. Connect a test lamp between the door lock actuator lock circuit at the door lock actuator connector and ground.
  3. Press the door lock switch to the lock position.

Did the test lamp illuminate?

Go to Step 5

Go to Step 11

5

  1. Connect the test lamp between the door lock actuator unlock circuit at the door lock actuator connector and ground.
  2. Press a door lock switch to the unlock position.

Did the test lamp illuminate?

Go to Step 10

Go to Step 12

6

  1. Disconnect the inoperative door lock switch.
  2. Connect a test lamp between the battery positive voltage circuit at the switch connector and ground.

Did the test lamp illuminate?

Go to Step 7

Go to Step 13

7

Momentarily connect a fused jumper between the battery positive voltage circuit and the door lock relay control circuit at the switch connector.

Did the doors lock?

Go to Step 8

Go to Step 14

8

Momentarily connect a fused jumper between the battery positive voltage circuit and the door unlock relay control circuit at the switch connector.

Did the doors unlock?

Go to Step 9

Go to Step 13

9

Inspect for door connection at the door lock switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs.

Did you find and correct the condition?

Go to Step 17

Go to Step 15

10

Inspect for poor connections at the door lock actuator. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs.

Did you find and correct the condition?

Go to Step 17

Go to Step 16

11

Repair the open in the door lock actuator lock circuit. Refer to Circuit Testing and Wiring Repairs.

Did you complete the repair?

Go to Step 17

--

12

Repair the open in the door lock actuator unlock circuit. Refer to Circuit Testing and Wiring Repairs.

Did you complete the repair?

Go to Step 17

--

13

Repair the open in the battery positive voltage circuit. Refer to Circuit Testing and Wiring Repairs.

Did you complete the repair?

Go to Step 17

--

14

Repair the open in the door lock and/or unlock circuits. Refer to Circuit Testing and Wiring Repairs.

Did you complete the repair?

Go to Step 17

--

15

Replace the door lock switch. Refer to Door Lock Switch Replacement.

Did you complete the repair?

Go to Step 17

--

16

Replace the door lock actuator. Refer to Power Door Lock Actuator Replacement.

Did you complete the repair?

Go to Step 17

--

17

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2