Removal Procedure
- Raise and suitably support the vehicle with safety stands. Refer to
Lifting and Jacking the Vehicle
.
- Remove engine cover to gain access to rear mounts. Refer to
Engine Cover Replacement
.
- Support the transmission with safety stands.
- Remove the transmission rear mount bracket to transmission rear mount bolts.
- Lift the transmission to take the weight off the mounts.
- To remove right hand mount remove the transmission bracket to transmission bolt.
- Remove the transmission mount bracket.
- To remove left hand mount remove the transmission mount bracket to transmission
bolts.
- Remove the transmission mount bracket.
Installation Procedure
- Install the left transmission mount bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission mount bracket bolts.
Tighten
Tighten the transmission mount bracket bolts to 100 N·m (74 lb ft).
- Install the right transmission mount bracket.
- Install the transmission mount bracket bolts.
Tighten
Tighten the transmission mount bracket bolts to 100 N·m (74 lb ft).
- Lower the transmission mount brackets on to the transmission mount.
- Install the transmission mount brackets to transmission mount bolts/nuts.
Tighten
Tighten the transmission mount bracket bolt/nuts to 195 N·m (144 lb ft).
- Remove the safety stands from the transmission.
- Install engine cover. Refer to
Engine Cover Replacement
.
- Lower the vehicle.