GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1486644  Size: SH
  1. Apply the parking brake.
  2. Block the wheels.
  3. Drain all of the air reservoirs. Refer to Air Brake Reservoir Draining .
  4. Disconnect the wiring harness connector.
  5. Remove the trailer air brake stop lamp switch.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1486644  Size: SH
  1. Install the trailer air brake stop lamp switch.
  2. Tighten
    Tighten the trailer air brake stop lamp switch to 7 N·m (62 lb in).

  3. Connect the wiring harness connector.
  4. Start the engine and build up the system air pressure.
  5. Test the brakes for proper operation.
  6. Remove the wheel blocks.