- Block the wheels.
- Remove the valve.
- Plug the delivery port.
- Connect an air supply to one of the supply ports. Apply approximately
861 kPa (125 psi) of air pressure.
- Apply a soap solution to the opposite supply port.
- Check that the leakage is less than a 25 mm (1 in) bubble
in 5 seconds.
- If the leakage exceeds these specifications, replace or overhaul the
valve. Refer to
Air Brake Double Check Valve Replacement
or
Air Brake System Description and Operation
.
- Disconnect the air supply.
- Repeat steps 4 through 6 on the other supply port.
- Shut off and disconnect the air supply.
- Unplug the delivery port.
- Install the valve.
- Charge the air supply.
- Check the brakes.
- Remove the wheel blocks.