Tools Required

J 36513 Gear and Bearing Separator Plate

Important: 

•	Only remove the bearings if replacing the bearings. Do not use the bearings again after removal.

•	You must also replace the race for the bearing being replaced.

1. Inspect the bearing for damage or wear. Refer to Bearings and Spacers Cleaning and Inspection .
2. Using a hydraulic press and the J 36513  (1), remove the input shaft bearing.



3. Remove the input shaft oil deflector using a suitable prying tool.
4. Discard the input shaft oil deflector after removal.

Tools Required

J 36513 Gear and Bearing Separator Plate

Important: 

•	Only remove the bearings if you are replacing the bearings. Do not use the bearings again after removal.

•	You must also replace the race for the bearing being replaced.

1. Inspect the bearing for damage or wear. Refer to Bearings and Spacers Cleaning and Inspection .
2. Using a hydraulic press and the J 36513  (1), remove the input shaft bearing.



3. Remove the input shaft oil deflector using a suitable prying tool.
4. Discard the input shaft oil deflector after removal.