Tools Required
| • | J 44725 Gear
Pack Assembly Fixture |
| • | J 44746 Mainshaft/Input
Shaft Bearing Race Installer |
Important: Certain transmission components require preheating to 150°C (300°F).
In order to preheat the components, use an electric oven. It is recommended
to purchase a roaster/oven style locally. The oven should have a temperature
setting thermostat.
- Position the input shaft on the J 44725
(3).
- Install the input shaft oil deflector using the J 8092
(1) and the J 44746
(2). The J 44746
has an area for installing the oil deflector.
- Ensure the oil deflector is fully and squarely seated.
- Preheat the input shaft
bearing to 150°C (300°F) for 30 minutes in an electric oven.
Caution: When handling parts that have been preheated for installation purposes,
always wear leather welding gloves with a minimum amount of handling time.
Failure to wear leather gloves may result in severe skin burns or personal
injury.
- Wearing protective gloves, install the input shaft bearing
on the input shaft. Rotate the bearing in order to seat it fully and squarely.
- Allow the bearings to cool before further installation of the
input shaft.
Tools Required
| • | J 8092 Universal
Driver Handle - 3/4in - 10 |
| • | J 44725 Gear
Pack Assembly Fixture |
| • | J 44746 Mainshaft/Input
Shaft Bearing Race Installer |
Important: Certain transmission components require preheating to 150°C (300°F).
In order to preheat the components, use an electric oven. It is recommended
to purchase a roaster/oven style locally. The oven should have a temperature
setting thermostat.
- Position the input shaft on the J 44725
(3).
- Install the input shaft oil deflector using the J 8092
(1) and the J 44746
(2). The J 44746
has an area for installing the oil deflector.
- Ensure the oil deflector is fully and squarely seated.
- Preheat the input shaft
bearing to 150°C (300°F) for 30 minutes in an electric oven.
Caution: When handling parts that have been preheated for installation purposes,
always wear leather welding gloves with a minimum amount of handling time.
Failure to wear leather gloves may result in severe skin burns or personal
injury.
- Wearing protective gloves install the input shaft bearing
on the input shaft. Rotate the bearing in order to seat fully squarely.
- Allow the bearings to cool before further installation of the
input shaft.
