Fuel Hose/Pipes Replacement - Chassis Dual Tanks

1. Remove the front and auxiliary fuel tanks. Refer to Fuel Tank Replacement .
2. Disconnect the pressure balance pump electrical connector.



3. Remove the fuel bundle nuts.
4. Remove the fuel bundle.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the fuel bundle.
2. Install the fuel bundle nuts.

Tighten
Tighten the nuts to 16 N·m (12 lb ft).




3. Connect the pressure balance pump electrical connector .
4. Install the front and auxiliary fuel tanks. Refer to Fuel Tank Replacement .