Removal Procedure
- Using a pick or a small flat-bladed screwdriver, remove and discard the quick connect fitting clip (1) from the charge air cooler outlet pipe.
- Loosen the charge air cooler outlet pipe clamp (2) at the charge air cooler.
- Remove the charge air cooler outlet pipe from the charge air cooler.
- Remove the charge air cooler outlet pipe (3) from the intake air valve.
Installation Procedure
- Install a NEW quick connect fitting clip to the charge air cooler pipe (3).
- Install the charge air cooler outlet pipe to the intake air valve.
- Install the charge air cooler outlet pipe to the charge air cooler.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the charge air cooler outlet pipe clamp (2) at the charge air cooler.
Tighten
Tighten the clamp to 8 N·m (71 lb in).