GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1867149  Size: SH
  1. Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement .
  2. Disconnect the engine wiring harness electrical connector (1) from the fuel temperature sensor.

  3. Object Number: 1867151  Size: SH
  4. Remove the fuel temperature sensor (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1867151  Size: SH
  1. Install the fuel temperature sensor (1).
  2. Tighten
    Tighten the sensor to 22 N·m (16 lb ft).


    Object Number: 1867149  Size: SH
  3. Connect the engine wiring harness electrical connector (1) to the fuel temperature sensor.
  4. Install the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement .
  5. Prime the fuel system. Refer to Fuel System Priming .
  6. Start the engine. If the engine stalls, repeat the above step.
  7. Once the engine starts, inspect for fuel leaks.